ARKdeko’ full backlit panels are complete illuminated architectural wall units that combine a marble-look decorative surface, integrated LED lighting system, diffuser technology, aluminium structural frame, power supply, and electrical components into a single ready-to-install solution.

Unlike translucent panels that require an independently built lightbox, full backlit panels arrive as a complete engineered unit designed to deliver consistent illumination and predictable performance.

They are ideal for luxury interiors where aesthetics, reliability, and ease of installation are equally important.

ARKdeko’ full integrated lighting panels are 22 mm (about 0.6 inches) thick only.

This slim profile allows elegant architectural integration, making them particularly attractive for refined contemporary interiors where precision and clean detailing matter.

Full backlit panels weigh approximately 24 kg/m² (4.9 kg/sq ft).

This is significantly lighter than many traditional illuminated stone systems, which often combine natural stone slabs with separate lightboxes and can exceed 40–60 kg/m².

The reduced weight simplifies transportation, handling, and installation.

To maintain high brightness and ease of handling and trasportation, the maximum recommended single unit size is generally around 3 square meters, with a maximum width of approximately 100 cm (39 inches) and a maximum height of 280 cm (110 inches).

Larger walls are achieved through carefully planned multi-panel compositions that preserve visual continuity and marble vein alignment.

It is also recommended to use panels of the same size in multiple compositions

The LED system is fully integrated inside the panel structure and engineered to work in harmony with the decorative marble-look surface.

Light is distributed through an internal diffuser, which helps eliminate hotspots, improve uniformity, and maximize lighting efficiency.

The result is a balanced illumination that enhances the depth, translucency, and visual richness of the marble-inspired design.

Yes. ARKdeko’ full backlit panels are supplied complete with driver, power supply and electrical connection system.

Units are supplied to comply with the major electrical requirements for Europe, the United Kingdom and the Emirates, the United States, Canada, Australia.

The integrated LED system operates at 24V DC, with the appropriate power supply and connection configuration provided according to the project destination and local electrical standards.

This allows straightforward integration into international projects.

Yes. The panels are dimmable, allowing brightness adjustment according to the desired atmosphere and project requirements.

Several lighting temperatures can be specified depending on the desired mood and architectural context.

Typical options include:

• Warm White (3000K)
• Neutral White (4000K)
• Cool White (6000K)

Many luxury residential and hospitality projects prefer 4000K for its balanced and contemporary appearance.

On request it is possible to have a tunable White or an RGB W system.

ARKdeko’ integrated lighting systems are engineered for high efficiency and long-term reliability.

The internal diffuser plays a crucial role by maximizing light distribution and reducing energy waste, allowing the system to achieve excellent visual brightness without excessive power consumption.

Compared to many traditional backlit stone installations or high-absorption LED sheet systems, the engineered configuration provides a more balanced combination of efficiency, visual comfort, and lighting performance.

The integrated LED system is designed for long-term operation and typically offers a service life of approximately 50,000 hours under normal operating conditions.

In the event that the integrated LED system reaches the end of its service life or requires replacement due to accidental damage, the panel can be professionally disassembled to allow access to the internal lighting components. A new LED source can then be installed without replacing the decorative panel itself. ARKdeko’ can provide technical assistance and guidance throughout this process.

ARKdeko’ full backlit marble-look panels are designed to arrive as complete, ready-to-install illuminated units, reducing the complexity normally associated with traditional backlit stone installations.

Each panel incorporates the decorative marble-look surface, integrated 24V DC LED lighting system, internal diffuser, aluminium structural frame, power supply, and electrical connection within a single engineered assembly.

The fixing method is selected according to the project. The most common installation solution is a rear bracket system, with brackets pre-assembled on the back of the panel for secure wall fixing. For niche applications, a lateral cable exit can be provided so the panel fits neatly inside the recess; in this case, fixing may also be managed with professional dual-lock Velcro systems where appropriate.

For furniture integrations, such as bar cabinets, reception counters, or bespoke joinery, mechanical fixing elements can be screwed into the rear structure or into the plywood support prepared by the carpenter, allowing the illuminated panel to become part of the furniture design.

In general, full backlit panels should not be cut on site, as they are supplied as complete engineered units incorporating the decorative marble-look surface, internal diffuser, LED lighting system, aluminium frame, and electrical components.

For this reason, all dimensions, cut-outs, cable exits, and technical details should ideally be defined during the design phase so the panel can be manufactured to the exact project specifications.

ARKdeko’ can accommodate a wide range of custom requirements, including:

• made-to-measure dimensions
• socket and switch openings
• niches and recesses
• furniture integrations
• cable exit positioning
• custom panel shapes
• project-specific fixing solutions

The main difference is how the lighting system is managed.

Translucent panels are supplied as the decorative illuminated surface only, requiring the client or contractor to create the supporting lightbox, lighting layout, and installation structure.

Full backlit panels are complete ready-to-install units with integrated LED lighting, internal diffuser technology, aluminium structural framing, and certified power systems.

Translucent panels offer greater installation flexibility, while full backlit units provide a more immediate turnkey solution with fully engineered lighting performance.

Yes. Every full backlit panel can be tailored to the project, including:

• custom dimensions
• curated vein direction
• marble and onyx-inspired designs
• panel composition planning
• cut-outs and technical openings
• lighting temperature selection
• dimming options

This allows each installation to become a unique architectural feature rather than a standard lighting element.

When a project requires multiple panels, minimal joints may be present, as with any architectural cladding system.

However, ARKdeko’ pays particular attention to layout planning, vein continuity, and panel composition so the overall visual result remains refined and coherent.

The objective is never a fragmented decorative appearance, but a harmonious marble-inspired architectural composition.

The joints do not require filling as the panels are installed side by side. Special decorative metal profiles are available if the project require them for design purpose.

ARKdeko’ full backlit marble-look panels are designed to arrive as complete, ready-to-install illuminated units, reducing the complexity normally associated with traditional backlit stone installations.

Each panel incorporates the decorative marble-look surface, integrated 24V DC LED lighting system, internal diffuser, aluminium structural frame, power supply, and electrical connection within a single engineered assembly.

The fixing method is selected according to the project. The most common installation solution is a rear bracket system, with brackets pre-assembled on the back of the panel for secure wall fixing. For niche applications, a lateral cable exit can be provided so the panel fits neatly inside the recess; in this case, fixing may also be managed with professional dual-lock Velcro systems where appropriate.

For furniture integrations, such as bar cabinets, reception counters, or bespoke joinery, mechanical fixing elements can be screwed into the rear structure or into the plywood support prepared by the carpenter, allowing the illuminated panel to become part of the furniture design.

The installation process generally involves preparing the wall, niche, or furniture structure, securing the panel with the appropriate fixing method, connecting the integrated lighting system through a qualified electrician (if the driver for home system is specified), or connect them to the plug, and enjoying the illumination and dimming functions.

ARKdeko’ can provide technical guidance and evaluate expert installation support for challenging projects.

No, installers cannot cut.

While on-site trimming is possible, we recommend supplying the panels pre-cut according to the project requirements. This allows for a cleaner architectural finish, precise edge detailing, and proper management of the marble veining, ensuring the design concludes naturally at the panel boundaries without chipping or visual disruption.

Pre-planned cut-outs and dimensional coordination are recommended.

ARKdeko’ panels can be developed with openings for electrical sockets, switches, TV mounts, niches, and other architectural details.

Because each project is custom-developed, these technical integrations are planned in advance along the design phase.

Yes, when properly specified.

Full backlit panels are often used in luxury bathrooms, wellness environments, hospitality suites, and decorative humid-area applications where illuminated architectural surfaces create atmosphere and visual impact.

Project-specific conditions should always be evaluated during design development.

Full backlit panels are designed primarily for indoor applications.
However, certain outdoor projects may be evaluated on a case-by-case basis. Depending on the installation environment, ARKdeko’ can develop customized illuminated solutions using suitable lighting systems, dedicated structural configurations, and project-specific engineering to accommodate protected exterior applications.

Backlit marble-look panels may be suitable for fireplace walls depending on the fireplace type, wall layout, heat exposure, ventilation, and supporting structure.

Because full backlit panels include an integrated LED system, the installation must be carefully evaluated to ensure that the panel is not exposed to excessive or direct heat. The final feasibility depends on the technical conditions of the wall, the distance from the active heat source, and the overall design layout. For this reason, project drawings, dimensions, and fireplace specifications are recommended before confirming the solution.

Full backlit marble-look panels are actually not suitable for curved walls, as they require a flat installation surface.

For curved walls, the most appropriate solution is the translucent marble-look panel. This option allows the decorative surface to follow curved or shaped architectural structures, while the lighting system can be designed separately behind the panel according to the radius, wall geometry, and project requirements.

With the correct support structure, LED layout, diffuser, and spacing, translucent panels can create a refined illuminated marble effect on curved walls, arched surfaces, or more fluid architectural features.

ARKdeko’ can assist in evaluating the project and advising whether a translucent backlit solution is technically suitable for the desired curved application.

ARKdeko’ full backlit marble-look panels are primarily engineered for wall applications and are not specifically designed as standard ceiling panels.

For ceiling applications, the most appropriate solution is usually the translucent marble-look panel typology.

This option offers a very lightweight decorative surface, approximately 2.8 kg per square meter, making it more suitable for integration into architectural ceiling structures.

The lighting system can then be designed separately behind the panel, according to the ceiling geometry, radius, support structure, and project requirements.

This approach offers greater flexibility, safer technical management, and easier access for lighting maintenance compared to using a complete integrated backlit unit on the ceiling.

In selected projects, ceiling installation may be evaluated, but it must be approached with particular attention to safety, fixing method, panel weight, electrical access, and the supporting structure. The installation solution should be defined directly by qualified contractors according to the project conditions.

For ceiling applications, the panel should be mechanically secured not only along the perimeter, but also through appropriate rear fixing points or dedicated support systems, ensuring stable and safe installation over time.

Because every ceiling condition is different, ARKdeko’ recommends sharing drawings, dimensions, and structural details before confirming feasibility. Where appropriate, the technical team can assist with guidance on fixing logic, cable exit positioning, and project-specific support solutions.

Routine cleaning is simple and typically requires only a soft cloth and non-aggressive neutral cleaning products, diluted in water.

ARKdeko’ backlit marble-look panels can typically be installed by qualified contractors, interior-fitting professionals, carpenters, and electricians familiar with architectural lighting systems.

The installation responsibilities often vary depending on the project. Contractors or joinery professionals may prepare the supporting structure, wall, niche, or furniture integration, while qualified electricians perform the electrical connections and commissioning of the integrated 24V DC lighting system.

Because ARKdeko’ full backlit panels are supplied as complete pre-engineered units with integrated LEDs, diffuser, aluminium frame, and power supply, the installation process is considerably simpler than building a custom illuminated wall system from separate components.

ARKdeko’ provides technical guidance, layout assistance, fixing recommendations, and project support throughout the process. For particularly complex, high-value, or technically demanding installations, the possibility of expert installation support can also be evaluated on a project-by-project basis.